|
 Radio Industries for radio's and accessories.
|
| INTELLIGENT WIRELESS
TOWER SITE AUTOMATION SYSTEMS |
Radio Industries distrbutes the Sentor Intelligent
Monitoring Systems.
Products for this niche application are
specified below.
Additional information is available from
the Sentor website at www.sentor.com |
 The
Sentor ST3000R Sentor Controller Unit - Rack Mounting
 The Sentor ST3000R Sentor Controller Unit - Wall Mounting
|
| Description |
The Sentor ST3000 controller
unit. |
| Comprises |
- Up to 80 Programmable Inputs
- 40 Outputs
- Lead Acid Backup battery
- On-board lithium battery
- Tamper switches
- Auxiliary Power outputs
- Horn and siren outputs
- RS232 Communications port
- RS485 Port
- X10 connection
- 19" Rack or wall mount casing
|
| Inputs and Outputs |
- Analog 0 - 30V
- Analog 0 - 10V
- Analog 0 - 1V
- Analog 4 - 20mA
- Analog Temperature
- Digital
- Protected Loop
| |
 |
| Description |
The Sentor General I/O
Expansion Card |
| Comprises |
Each ST317 fits inside the
ST300R or ST300W housing.
The card has a mirror image
of the inputs available on the ST300 Motherboard. Comes with
16 optically isolated programmable analogue or digital inputs
and 8 Relay Dry Contact Digital outputs. Includes expansion
cable. | |
 |
| Description |
The ST330 interface is an
Approved interface card that plugs directly onto the Sentor
motherboard. It performs many tasks such as being a landline
modem for remote data transfer. |
| Comprises |
The ST330 can also be
programmed as a dialer to call a computer, and/or a telephone
and even a pager. It talks in a real recorded voice with
dynamic menu and device details following the suggested keypad
prompts over a Mobile or Standard telephone.
The
technician or manager can be informed of alarms in real time
over the phone with values and alarm/device information. The
user can remotely change the state of a device from the phone
or at the Central Computer. A remote laptop (with the correct
codes) can access the Sentor System through this card allowing
a live graphical picture of the remote sites with the event
log and real time readings. | |
 |
| Description |
This is Cellular (GSM) Data
modem used for remotely dialing sites. |
| Comprises |
The Cellular (GSM) is a
Tri-Band modem that works with both the GSM system and the
American Cellular Networks. | |
 |
| Description |
The RF (Radio) modem is used
for remotely dialing sites that do not have cellular, land
line or GSM coverage. |
| Comprises |
Like the GSM Cellular modem the
RF modem uses data transmissions to talk to the Sentor GUI
from a remote site. | |
 |
| Description |
Sentor LCD heavy duty serial
Programmable Keypad, Vertical mount. |
| Comprises |
Large LCD backlit keypad, fully
programmable as a Security keypad and Site Access.
Will also display all device readings live such as
Voltages, Forward and Reflected Power for Transmitter sites,
Battery backup voltages, Site Access Control and System Event
Data Log. | |
 |
| Description |
Sentor LCD serial Keypad,
horizontal mount. |
| Comprises |
Large LCD backlit keypad fully
programmable as a Security keypad and Site Access.
Will also display all device readings live such as
Voltages, Forward and Reflected Power for Transmitter sites,
Battery backup voltages, Site Access Control and System Event
Data Log.
The ST007H also has an attractive finish for
office applications. | |
|
Additionally Radio Industries offers products for:
- Readers for Swipe Cards and/or FOB's
- Housing for wall or rack mounting - depending on your
application requirements
- Waterproof housing for outside applications
- Sentor Accessories - from batteries to temperature sensors
|
|
|
Call Radio Industries today on
(02) 4362 7500 or Contact Radio
Industries by email.
|
